H&T Tile Inlay

I'm not the one who came up with the tile inlay in the Homes and Tomes hall. That was Pizazz. But it's one of the most asked-about features of our hall. On the old forum, Pizazz was kind enough to post the instructions in the thread about the Corporate Headquarters of Homes and Tomes. However, since we don't know how long the old forums will continue to exist, I've copied his instructions here. Enjoy!

4 white tiles, 4 red tiles, and 1 gold coin tile in 3 layers. Everything is at the same X, Y coordinate but the layers are at different Z coordinates
Layer 1:

• 2 white, 2 red - scale as desired.
• Rotate the red tiles 45
• Rotate the white tiles -45 
• Roll 1 red and 1 white tile 179.25 and roll the other 1 red and 1 white tile -179.25

Layer 2:

• 2 white, 2 red - scale to 1/2 of layer 1. 

• Rotate the white tiles 45

• Rotate the red tiles -45

• Roll 1 red and 1 white tile 179.25 and roll the other 1 red and 1 white tile -179.25

• raise the layer 0.010 - I might be off on how far to raise it 

Layer 3:

• 1 gold coin tile

• scale to layer 1 scale + small amount - I think in the case of this example the gold is 0.10 larger than layer 1

• Rotate the gold coin tile 45 degrees.

• raise or lower the tile to get the desired border effect.

Decorating Haiku

While chatting in guild the other evening, the subject of floor inlay designs came up. Many decorators use inlays as a low-cost (unless you're Bitsy, making awesome and complex floor designs) way of filling in an empty space. They give a room some pizazz without having to use a rug. I'm just as "guilty" of using floor inlays as other people.

The floor inlay in Homes and Tomes guild hall.

But sometimes it feels like people go a little overboard with inlays.

They put them on the floors. They put them on the walls. They put them on the ceilings. They put them anywhere they think they can get away with it. And while an inlay here and there is pretty, you want it to draw the eye, not completely cover every surface.

I'm not saying that anyone has done this. It's just how it feels sometimes. But because I'm just as guilty of using inlays as everyone else, I figured it wouldn't hurt to post the tongue-in-cheek haiku a guildmate whipped up during our inlay discussion.

Squares squares ev'rywhere
On the floor and on the wall
Learn to decorate

(Thanks, Rosaphina! Your haiku skills are awesome!)

A visual representation is also known as a picture.

Then Elogrim upped the ante. In a fit of silliness, he whipped up a visual representation in AutoCAD.

The results were blinding and way too ornate for an everyday floor. And while the colors technically should work together in some fashion, they really don't.

Once we got over our giggles looking at the picture, it was almost a given that I had to jump in in some fashion. I mean, Rosa made a haiku making fun of us. Elogrim did something in AutoCAD to demonstrate When Inlays Go Wild. It's my turn, right?

So I decided that for my trick, being the layout editor crazy person that I am, I would actually build Elogrim's inlay out of stained glass tiles. Technically, I could have built it almost perfectly flat, but I have a teleport pad up so that brave people who either have featherfall or don't mind dying can take a look from up high. Because of the distance however, I had to increase the height between tiles so that there wouldn't be shimmer (well, wouldn't be much shimmer) when seen from the teleport pad. So yes, I know the tiles aren't flush. I know they poke up a bit. But we must all make sacrifices in order to see the design as it is meant to be seen--from above, just like Elogrim's visual representation of Rosa's haiku.

Yes, this really does exist in-game. I'm so sorry. So, so sorry.

If you want to visit this horrible monstrosity of an eyesore, please feel free to visit Jazebelle's Tenebrous Island Refuge in Freeport on the Antonia Bayle server. That's Jazebelle, not Jazabelle. Note the difference in the single letter!

My notes on building the inlay for those interested:


Diameter of an octagon: s + 2x = d
Use pythag theorem to figure out x based on s.

Big purple octagon:
s = 12
x = 8.48528137
d = 28.97056274
r = 14.48528137

Radius of circle in layout editor: r + (s/2)
radius = 20.48528137

Same radius used for all purple and yellow tiles. Only difference is in the rotation and the scale.

Yellow tiles rotation is 45.
Purple tile rotation is 0.

small yellow tile scale:
Use pythag theorem to figure out small yellow tile scale.
scale = 4.242640685

Small purple tile scale:
Use pythag theorem to figure out small purple tile scale.
scale = 3

To figure out green tile scale, realize that the yellow tiles that create the corners create an isoseles triangle with the top angle at 45.

Green tile:
scale = 4.59220119
s = 2*scale
s = 9.18440238
x = 6.4943532

s + 2x = d

d = 22.17310878

r (of design, not octagon) = (d/2) - (scale)
r = x
r = 6.4943532

Start rotation needs to be 22.5 to get it shifted around the circle.